SOUTHERN MN NORTHERN IA DERBY ALLIANCE
Walters Fire Department-May 19th 6:00 pm
Rod Krebsbach (507)402-2988
Mapleton Town & Country Days-June 13th 7:00 pm
Randy Mosloski (507)524-4888
Swea City Fun days-June 24th 7:00pm
Stacey Flynn (515) 320-0422
Blue Earth Fire Department-July 13th 7:00pm
Ashley Bleess 9507)525-2066
Winnebago County Fair-July 14th 6:00 pm
Rod Krebsbach (507)402-2988
Faribault County Fair-July 26th & 28th 7:00 pm
Scott Scheid (507)866-4622
Martin County Fair-Aug 19th 2:00 pm
Cal Saxton (507)236-5676
Sportsmanship !!
Good sportsmanship will be observed, between drivers,
towards promoters, and to officials at all times. Anyone not doing so may be asked to leave and
not allowed to participate at future events.
Any poor sportsmanship will result in a drivers disqualification! Promoters and judges reserve the right to
refuse any car, driver, or pit person for any reason.
***POINTS MAY BE EARNED AT ANY OF
THESE DERBYS (IN THE FULLSIZE CLASS ONLY!!!!!)
ALLIANCE ALL-AROUND POINTS RULES
ALLIANCE ALL-AROUND POINTS RULES
To qualify you must participate in at least four derbys in the full size
class. You will be able to use your best
of four derbys if you run in more than four
derbys. Any other class doesnt
count.
Driver is responsible to get a promoter or head official to sign attached
form for each derby you receive points at.
If not signed on the day of the derby it will not count.
In the case of a tie, the fifth derby will be used as a tie breaker.
1st Place $500 and Trophy
2nd Place $250 and Trophy
3rd Place $75 and Trophy
PAYOUTS MAY VARY DEPENDING ON
PROMOTER PARTICIPATION!!!!!
POINTS:
1st place 15 points
2nd place 14 points
3rd place 13 points
Etc. Through the
feature
5 points will be awarded for bringing a car and running
at least one heat.
Blue Earth Fire Dept.
_______points_____________Promoter/Official
Faribault County Fair
_______points_____________Promoter/Official
Mapleton T & C Days
_______points_____________Promoter/Official
Martin County Fair
_______points_____________Promoter/Official
Swea City Derby Days
_______points_____________Promoter/Official
Walters Fire Dept.
_______points_____________Promoter/Official
Wi ALLIANCE ALL-AROUND POINTS RULES
To qualify you must participate in at least four derbys in the full size
class. You will be able to use your best
of four derbys if you run in more than four
derbys. Any other class doesnt
count.
Driver is responsible to get a promoter or head official to sign attached form
for each derby you receive points at. If
not signed on the day of the derby it will not count.
In the case of a tie, the fifth derby will be used as a tie breaker.
1st Place $500 and Trophy
2nd Place $250 and Trophy
3rd Place $75 and Trophy
PAYOUTS MAY VARY DEPENDING ON
PROMOTER PARTICIPATION!!!!!
POINTS:
1st place 15 points
2nd place 14 points
3rd place 13 points
Etc. Through the
feature
5 points will be awarded for bringing a car and running
at least one heat.
Blue Earth Fire Dept.
_______points_____________Promoter/Official
Faribault County Fair
_______points_____________Promoter/Official
Mapleton T & C Days
_______points_____________Promoter/Official
Martin County Fair
_______points_____________Promoter/Official
Swea City Derby Days
_______points_____________Promoter/Official
Walters Fire Dept.
_______points_____________Promoter/Official
Winnebago County Fair
_______points_____________Promoter/Official
ALL-AROUND POINTS RULESALLIANCE ALL-AROUND POINTS RULES
To qualify you
must participate in at least four derbys in the full size class. You will be able to use your best of four
derbys if you run in more than four
derbys. Any other class doesnt
count.
Driver is
responsible to get a promoter or head official to sign attached form for each
derby you receive points at. If not
signed on the day of the derby it will not count.
In the case of
a tie, the fifth derby will be used as a tie breaker.
1st Place $500 and Trophy
2nd Place $250 and Trophy
3rd Place $75 and Trophy
PAYOUTS MAY VARY DEPENDING ON PROMOTER
PARTICIPATION!!!!!
POINTS:
1st place 15 points
2nd place 14 points
3rd place 13 points
Etc. Through the
feature
5 points will be awarded for bringing a car and running
at least one heat.
Blue Earth Fire Dept.
_______points_____________Promoter/Official
Faribault County Fair
_______points_____________Promoter/Official
Mapleton T & C Days
_______points_____________Promoter/Official
Martin County Fair _______points_____________Promoter/Official
Swea City Derby Days
_______points_____________Promoter/Official
Walters Fire Dept.
_______points_____________Promoter/Official
Winnebago County Fair
_______points_____________Promoter/Official
General Promoters Rules
All drivers must wear a DOT approved full face helmet, safety glasses, seat
belt, long pants, closed shoes and a neck brace.
Car inspection: Cars will be
inspected before derby begins, after heats, and top three finishers will be
re-inspected after feature is complete.
If found to be illegal driver will lose all prize money and trophies.
Boundries will be observed at all times.
There will be no deliberate pushing of cars out of bounds, this will
warrant disqualification. Any car
knocked out of bounds must re-enter the same way it went out.
Drivers must maneuver forward and backward.
No deliberate hitting or flashing of drivers doors Intentional
violations will result in disqualification!
A 1 minute time limit is enforced for restarts and making competitive contact
with another car.
Two fires are allowed before disqualification.
Please decorate cars in good taste.
No alcoholic beverages allowed in pit.
Please keep speeds to and from the tracks down to a minimum.
Check with each promoter for age limits of drivers and pit people.
IF THE RULES DO NOT SAY IT DON NOT ASSUME THAT YOU CAN DO IT!!!! JUDGES
DECISIONS ARE FINAL!!!
General Car Preperation
All glass including windshield, side
windows, rear window, head and taillights are to be removed.
Autos must be swept clean. No junk
or debris allowed in car. Remove
flammables, carpet, rear seat, etc.
Fuel tanks (no plastic tanks) must be located in the back seat and securely
fastened and covered with nonflammable item.
Original gas tank must be removed.
Two batteries are allowed and must be moved to passenger front seat and
covered with nonflammable covers.
No reinforcements, fabrications, or trailer hitches permitted.
Transmission linkage and ignition switches may be altered in all classes.
A 12 hole must be cut in the hood for fire safety.
Safety bars in dash and behind seat are permitted (max8x8mounting plate)
and up to the roof of the car in the center of the roof (no kickers down). Four door cars with no post may be
beamed/posted up to roof (if welded it may be on inside of door post not on
outside holding doors).
A bar from the fron cowl to roof and a drivers window guard is recommended
for drivers safety.
Stock radiators in original position with no bracing or guards allowed.
Headers will be allowed in all classes, but must be straight up or a
maximum of 30 degree angle (no 90 degree).
Vehicles will have sufficient brakes at all times.
Mapleton Town & Country Days
Demolition Derby
June 13, 2007
1. Back gate will open at 3:00 p.m.
and close at 6:30 p.m. for a 7:00 p.m. start.
BE EARLY!!!
2. No one under the age of 16 will
be allowed in the pit area. Anyone
entering the pit area must sign a release
form before entering.
Vehicle classes will be Full size
( except pre-74 imps., hearses and ambulances), compact 106 wheel base or
less), or mini-vans.
All drivers must be 16 years of age with a valid drivers
license and parents consent or 18 years old.
Promoter reserves the right to reject any participant for
any reason.
Any vehicle thought to be dangerous to driver or any
other competitor will be disqualified.
Any questions call Randy Mosloski at 507-524-3177 or Bill
Hanson, the official at 507-525-0271.
ENTRY
Name___________________________________________
Phone Number____________________________________
Address_________________________________________
Car Number______________________________________
Year, Make, Model Car____________________________________
Drivers Signature________________________________________________________
$35 ENTRY FEE MUST BE SENT WITH REGISTRATION FORMS:
AFTER JUNE 4, 2007 (Includes car and driver)
Check:
______Full-size class
..$25 entry for car and driver
______Mini-van class
.$25 entry for car and driver
______Compact class
..$25 entry for car and driver
______Powder Puff ( bring your own car )
.$25 entry for car and driver
No refunds for any derby.
Send to: Randy Mosloski
408 Central Ave S.
Mapleton, MN 56065
Full-size
prizes:
Mini-van, Compact, and Powder Puff prizes:
1st. $500 and trophy
1st. $ and trophy
2nd. $250
and trophy 2nd $ and
trophy
3rd. $200 and trophy
3rd $ and trophy
4th. $100 and trophy * Prize money based on entries
1 Free for all. Two will advance-$75
3 Finalist each heat will advance-$25 and trophy
Best looking trophy and Hardest hitter trophy
Full Size Car Rules
All doors and trunk lid may be fastened shut by wire or a 5 skip weld with
a max plate size of 5 x 2 on outside door seams only, except drivers door
which may be reinforced for drivers safety.
Holes in floor or trunk pans or in frames may be replaced with like size
patches without over lapping for strength.
Frames: re-welding only the tops of the frame from A-arms forward is
allowed without adding any extra metal for filler or for bracing and 3/8
maximum width. Frame repair due to
damage or rust is allowed, on sides only, using like metal and not to overlap
more than 1 inch.
Bumpers and brackets (automotive only) may be interchanged from make,
model, and year without adding extra brackets homemade or otherwise. Bumpers, brackets, and shocks may be welded,
bolted, wired, or chained but if welded no more than 8 inches per side. We want the parts to stay on the cars and not
on track. A 28 max bumper height from
ground to the top of the bumper will be inforced.
Cutting fenders for tire clearance is permitted a four to five 5/16 bolts
may be added to hold fender to wheel well.
Tucking of trunk is permitted with access for inspection.
Hoods and trunks may be fastened shut, with wire (in a max of 8 spots) or
hoods and trunks may be bolted with max of four 3/4 bolts, 2 front bolts in
hood may be bolted through frame with regular washers and nuts behind radiator
support or welding on top of the frame only the diameter of the bolt. Hoods must be open for inspection.
Engines may be wired or bolted solid to the side of the frame not the
top. No welding motor mount to the top
of the frame. Max 2 bracket from motor
to the frame and one per side.
Any 5 bolt rear axel may be used.
Leaf spring can be clamped together with a maximum of 4 clamps on each
side.
Body mounts may be removed and rebolted with up to a 3/4 bolt and a max of
a 4x4x1/2 thick plate.
Transmission coolers are allowed.
Stem protectors allowed. Tires may
be 14 or 15 and must be air filled only.
No max ply rating inforced.
COMPACT
All doors and trunk lid may be fastened by wire or a 5 skip weld on
outside door seams only. Drivers door
may be reinforced for drivers safety. No
extra welding or bracing on body seams or frames will be allowed.
Frames must be stock only, no reinforcing by adding bolts or welding seams.
Bumpers may be wired, chained, or bolted on. No welding!!!
Cutting fenders, for tire clearance, is only permitted after first heat.
Tucking the trunk is allowed but pinching fenders or other body panel will
not be allowed.
Hoods and trunk lids may be fastened shut, with wire, in a max of 8 spots
or hoods may be bolted with 4 bolts fastened to sheet metal only (not to
frame). Hoods must be opened at time of
inspection.
Engines may be wired or bolted solid.
No welding on frame for motor mounts.
A max 2 bracket from the motor to the side of frame and only one on
each side allowed.
Stock axels, with no braces or modifying of brackets, may be welded for
possi-traction. Must be 2 wheel drive,
front or rear, if 4 wheel drive either front or rear must be disabled.
Body mounts, suspension, and shocks must be stock only.
Transmission coolers not allowed.
Tires (air only) must be stock DOT tires.
Stem protectors allowed if solid.
All doors and rear hatches may be fastened shut by wire or a 5 skip weld
on outside door seams only. Drivers door
may be reinforced for drivers safety. No
extra welding or bracing on body seams or frame allowed.
Frame must be stock only, no reinforcing by adding bolts or welding seams.
Bumpers may be wired, chained, or bolted on. No welding!!!
Cutting fenders, for tire clearance, is only permitted after first heat.
Pinching fenders for any other body panels will not be allowed.
Hoods may be fastened shut with a max of 8 spots or with 4 bolts fastened
to sheet metal only (not frame). Hoods
must be open at time of inspection.
Engines may be wired or bolted solid.
No welding on frame for motor mounts.
A max 2 bracket from the motor to the side of the frame and only one on
each side allowed.
Stock axels with no braces or modifying of brackets. Must be 2 wheel drive, front or rear, if 4
wheel drive either front or rear must be disabled.
Body mounts, suspension, and shocks must be stock only.
Transmission coolers are not
allowed.
Tires (air only) must be stock DOT
tires. Stem protectors allowed if solid.